AIR-AP1832I-E-K9

AIR-AP1832I-E-K9

  • Part Number: AIR-AP1832I-E-K9
  • Mô Tả: 802.11ac Wave 2 AP, 3×3:2, Internal Antenna, E Regulatory Domain
  • Tình Trạng: New Fullbox 100%
  • Stock: có sẵn hàng
  • Bảo Hành: 12 Tháng.
  • CO, CQ: Có đầy đủ
  • Xuất Xứ: Chính hãng Cisco

AIR-AP1832I-E-K9 Overview

AIR-AP1832I-E-K9 is one of the Cisco Aironet 1830 Series Access Points. Cisco 1830 AP series is ideal for small and medium-sized networks. This series supports the latest Wi-Fi standard, the 802.11ac Wave 2 standard. The 1830 Series extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support. The model AIR-AP1832I-E-K9 provides E Regulatory Domain and internal antennas.

Quick Specs

Table 1 shows the quick specs of AIR-AP1832I-E-K9.

Part Number AIR-AP1832I-E-K9
Description 802.11ac Wave 2 AP, 3×3:2, Internal Antenna, E Regulatory Domain
Features – 3×3 MIMO with two spatial streams, single-user or multiuser MIMO

– MRC

– 802.11ac beamforming (transmit beamforming)

– 20-, 40-, and 80-MHz channels

– PHY data rates up to 867 Mbps (80 MHz in 5 GHz)

– Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

– 802.11 DFS

– CSD support

Regulatory Domain E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 500 to 5.700 GHz; 8 channels

Integrated antenna – 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°

– 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°

Interfaces – 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)

– Management console port (RJ-45)

– USB 2.0 (enabled via future software)

Dimensions (W x L x H) 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight 3.12 lb (1.41 kg)

Product Details

Figure 1 shows the AIR-AP1832I LED Indicator Position.

Note: ① LED indicator position

Table 2 shows the AP LED indicators’ descriptions.

Message Type LED State Message Meaning
Association status Chirping Green Normal operating condition, but no wireless client associated
Green Normal operating condition, at least one wireless client association
Boot loader status Green Executing boot loader
Boot loader error Red Boot loader signing verification failure
Access point regulatory domain priming status Blinking Amber AP priming to a new regulatory domain by Neighbor Discovery Protocol (NDP), in progress
Cycling Red, Green and off AP waiting to be primed
Chirping Red AP primed to a wrong regulatory domain
Operating status Blinking amber Software upgrade in progress
Cycling through green, red, and amber Discovery/join process in progress
Rapidly cycling through red, green, amber, and off. Access point location command invoked from controller web interface.
Access point operating system errors Cycling through red, green, amber, and off General warning; insufficient inline power

Figure 2 shows AIR-AP1832I Ports and Connections.

Note:

Mode button PoE-In port (Ethernet Uplink port)
RJ-45 console port 48 V DC input power port
USB 2.0 port

Compare to Similar Items

Table 3 shows the comparison between two AP.

Part Number AIR-AP1832I-E-K9 AIR-AP1832I-E-K9C
Description 802.11ac Wave 2 AP, 3×3:2 802.11ac Wave 2 AP, 3×3:2

★ Model number ending in C is, by default, factory-shipped with a Cisco Mobility Express software image.

Integrated antenna Yes Yes
Regulatory Domain E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 500 to 5.700 GHz; 8 channels

E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 500 to 5.700 GHz; 8 channels

 

AIR-AP1832I-E-K9 Specification

AIR-AP1832I-E-K9 Specifications

Description 802.11ac Wave 2 AP, 3×3:2, Internal Antenna, E Regulatory Domain

Software

Cisco Unified Wireless Network Software Release with AireOS wireless controllers:

  • 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points

Deployment modes

Centralized, standalone, sniffer, Cisco FlexConnect, monitor, OfficeExtend, mesh

Supported wireless LAN controllers

  • Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller
  • Cisco Mobility Express

802.11n version 2.0 (and related) capabilities

  • 3×3 MIMO with two spatial streams
  • Maximal ratio combining (MRC)
  • 20- and 40-MHz channels
  • PHY data rates up to 300 Mbps (40 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • 802.11 dynamic frequency selection (DFS)
  • Cyclic shift diversity (CSD) support

802.11ac Wave 1 and 2 capabilities

  • 3×3 MIMO with two spatial streams, single-user or multiuser MIMO
  • MRC
  • 802.11ac beamforming (transmit beamforming)
  • 20-, 40-, and 80-MHz channels
  • PHY data rates up to 867 Mbps (80 MHz in 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • 802.11 DFS
  • CSD support
Regulatory Domain E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 500 to 5.700 GHz; 8 channels

Integrated antenna

  • 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°
  • 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°

Interfaces

  • 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
  • Management console port (RJ-45)
  • USB 2.0 (enabled via future software)

Indicators

  • Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions

(W x L x H)

  • Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)

Weight

  • 3.12 lb (1.41 kg)

Environmental

Cisco Aironet 1830i

  • Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  • Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
  • Operating temperature: 32° to 104°F (0° to 40°C)
  • Operating humidity: 10% to 90% (noncondensing)
  • Operating altitude test: 40˚C, 9843 ft.

System memory

  • 1 GB DRAM
  • 256 MB flash

Input power requirements

  • AP1830: 44 to 57 VDC
  • Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz

Power draw

  • 15.4W

Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.

Powering options

  • 802.3af/802.3at
  • Enhanced PoE
  • Cisco local power supply, AIR-PWR-C=
  • Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6=

Note: If 802.3af PoE is the source of power, the USB port is disabled.

Warranty

Limited lifetime hardware warranty

TOP

X